This procedure defines the method to control the non-conforming product (find out and solving the problem) and responsibility of each person. Makes sure the non-conforming product does not use in production line.
Định nghĩa: Sản phẩm không phù hợp: bao gồm NVL, BTP, thành phẩm không phù hợp với tiêu chuẩn kỹ thuật hay yêu cầu trong quá trình sản xuất, lưu kho và hàng trả về.
Non-conforming product: including of raw material, semi-product, finish product that are not meet the specification or the requirement in production line, storage and return.
TÓM TẮT CÁC BƯỚC TRONG QUY TRÌNH
Bước 01: Phát hiện NVL, BTP, TP, Sản phẩm lưu kho không phù hợp và HTV làm báo cáo SPKPH, chuyển đến phòng KSCL – Find and make nonconforming RW, Semiproduct, Finish goods, Stored goods, return goods report, make non-conforming product report then send it to QC.
Bước 02: Kiểm tra đầy đủ các tính chất vật lý (nếu cần), sau đó xem xét hồ sơ lưu – Check all physical properties (if need), then review the records.
Bước 03: KSCL giải quyết như hồ sơ củ - QC solving as records.
Kết thúc lưu hồ sơ. Stop, keep in file
Bước 04: Đưa ra hướng giải quyết, sau đó thông báo lại cho KSCL – Give solution, then give it back QC
Bước 05: Từ chối nhận NVL hoặc chờ thanh lý đối với lô hàng này– Reject or wait for disposal of stock.
Kết thúc lưu hồ sơ. Stop, keep in file
Bước 06: Thực hiện cách giải quyết – Carry out solution.
Bước 07: Kiểm tra và báo cáo việc thực hiện- Check & report the solution.
Bước 08: Giám đốc Kỹ thuật quyết định cần khắc phục – Technical manager decide need corrective, & preventive action
Bước 09: Không cần KPPN, kết thúc lưu hồ sơ – No need corrective, preventive action. Stop, keep in file.
Bước 10: Cần KPPN - Need corrective & preventive action.
Bước 11: Kết thúc lưu hồ sơ. / Stop, keep in file.
Các biểu mẫu của quy trình
1. Báo Cáo Sản Phẩm Không Phù Hợp – Nonconforming product report
No comments:
Post a Comment
haccololong@gmail.com